OTHER FRUIT LINES

Other Fruit Lines: Compare Preparation and Product Boundaries

Explore 59 other fruit, vegetable and nut ingredients across ten categories. Compare preparation and product boundaries with the guava pulp and juice routes.

PREPARATION / SEPARATION / PRODUCT

Compare the preparation behind each product

Guava selection often turns on seeds, stone cells and the body retained in the product. This directory applies the same practical approach to 59 other fruits, vegetables and nut ingredients. Choose a family, compare its preparation and read the questions that determine the next engineering step. A familiar product name does not establish a shared machine duty. Bring the selected material, accepted texture and actual inlet condition back to the guava line discussion when evaluating common downstream equipment or a new preparation front end.

Explore guava pulp and juice routes →

5 PREPARATION ROUTES

Citrus Fruit

Citrus juice extraction controls peel oil and membranes rather than guava stone cells. Define the juice and pulp fractions before comparing a finishing or treatment duty.

Grapefruit processing line

NFC juice / juice concentrate / juice blend base

Grade and wash grapefruit before extraction, then remove membranes and finish the juice to the desired pulp content. Treat colour and bitter taste as product specifications. Any debittering treatment is a separate development choice; it should follow sensory trials instead of being assumed for every grapefruit product.

Questions for a representative trial

Will the line handle white, pink or red grapefruit, and what large-fruit diameter range must the extraction section accept?
What bitterness profile is acceptable to the buyer, and should trials compare different extraction intensity and membrane carryover before adding a treatment stage?

Full Grapefruit line: process, equipment & image →

Lemon processing line

juice / juice concentrate / marmalade base

Clean and inspect the peel before juice extraction, then remove seeds and finish the expressed liquid. Clear lemon juice and cloudy lemon ingredients require different clarification decisions. Keep any peel-oil or peel-preserve preparation as an explicitly defined branch, rather than assuming it is recovered with the juice.

Questions for a representative trial

Does the buyer require clear or cloudy lemon juice, and which sediment or haze limits will define acceptance after storage?
Will oil-rich peel be processed separately, and what variation in fruit size, peel thickness and acidity must extraction trials include?

Full Lemon line: process, equipment & image →

Lime processing line

juice / juice concentrate / beverage base

Sort limes for condition and size, clean the surface and extract while controlling rind contact. Separate seed and membrane fragments before the selected finishing stage. Juice destined for a beverage base may subsequently be formulated, whereas a concentrate route requires its own solids and flavour specification.

Questions for a representative trial

Which lime species and size grades will arrive, and can the chosen feed arrangement handle small fruit consistently?
How much characteristic rind flavour is wanted, and how will seed fragments, bitterness and final juice clarity be assessed on the intended raw material?

Full Lime line: process, equipment & image →

Mandarin / Tangerine processing line

juice / juice blend base / marmalade

Receive and sort mandarins separately where size and peel looseness differ from oranges. Wash, extract with limited peel disruption and remove seeds or coarse membranes. Set the pulp specification before blending. A marmalade route deliberately retains selected peel and therefore requires its own preparation and texture specification.

Questions for a representative trial

Can the extraction setup accommodate the actual mandarin size distribution and loose peel without excessive peel pickup or lost flesh?
Is the goal a standalone mandarin juice or a blend component, and how will batches be accepted for peel flavour, sweetness and pulp character?

Full Mandarin / Tangerine line: process, equipment & image →

Orange processing line

NFC juice / juice concentrate / marmalade

Sort sound fruit by size, wash the peel and extract the juice with controlled contact between peel and flesh. Separate seeds and finish to the chosen pulp level. Direct juice, concentrate and peel-containing marmalade diverge after extraction; peel oil recovery is a separate stream to evaluate.

Questions for a representative trial

Which orange varieties and diameter range must the extractor handle, and what peel-oil carryover is acceptable in the finished juice?
Should the product retain visible pulp, and will peel handling be limited to waste removal or include a separately specified co-product route?

Full Orange line: process, equipment & image →

4 PREPARATION ROUTES

Orchard & Vine Fruit

Apple and pear can be pressed or pulped, grape has skins and pips, and kiwi has fine seeds. Each needs a texture specification as explicit as the guava seed policy.

Apple processing line

cloudy juice / clear juice concentrate / purée

Inspect and wash sound apples, mill them to a size suited to extraction and press for juice. Clear juice adds a clarification stage; cloudy juice retains selected suspended material. A purée route instead separates coarse skin and core material while preserving the intended flesh texture.

Questions for a representative trial

Is the target clear juice, stable cloudy juice or spoonable purée, and what incoming variety and maturity range must be covered?
How will the design limit air pickup after milling, and what acceptance test will distinguish useful cloud from coarse sediment?

Full Apple line: process, equipment & image →

Grape processing line

grape juice / juice concentrate / jelly base

Remove unwanted stems, inspect and crush grapes before the chosen pressing route. Skin contact affects colour extraction, so white and deeply coloured juices should not share an assumed recipe. Clarification and management of later crystalline deposits are additional product decisions before concentration or packing.

Questions for a representative trial

Which grape varieties and target colour will be used, and should the process maximise skin colour extraction or minimise it?
How will the finished juice be checked for tartrate deposits during its intended storage, and what stem and seed carryover can the extraction stage tolerate?

Full Grape line: process, equipment & image →

Kiwifruit processing line

purée / purée concentrate / nectar base

Sort kiwifruit for ripeness, wash and remove the skin before pulping. Refine the flesh according to the required texture and intended seed appearance. Decide between single-strength purée and concentration after evaluating the product; a smooth drink base and a visibly seeded fruit preparation need different specifications.

Questions for a representative trial

Should the small black seeds remain visible, be reduced or be separated, and how will that choice affect the desired appearance?
Will the plant process green- and yellow-fleshed varieties separately, and what skin fragments, firmness range and colour change are acceptable in production trials?

Full Kiwifruit line: process, equipment & image →

Pear processing line

cloudy juice / clear juice / purée

Inspect pears for soundness and processing ripeness, wash and reduce the flesh to a suitable mash. Pressing leads to juice; pulping and refining lead to purée. The selected screen or separation step should be judged on the resulting mouthfeel, with clarification added only for a clear-juice product.

Questions for a representative trial

Are incoming pears firm processing fruit or soft ripe fruit, and how widely does flesh texture vary during the season?
For purée, what level of graininess or coarse material is acceptable; for juice, is the priority retained cloud, clarity or easy concentration?

Full Pear line: process, equipment & image →

5 PREPARATION ROUTES

Stone Fruit

Large stone separation comes before comparison with the guava pulper. Record how pitted flesh and any retained skin reach the downstream refining stage.

Apricot processing line

purée / nectar base / jam

Inspect and wash apricots, remove the stones and refine the remaining flesh. Keep kernels out of the edible pulp stream. The purée texture can then be adjusted for a nectar base or a thicker preserve; concentration is a separate choice that changes transfer and finishing requirements.

Questions for a representative trial

How will pitting accommodate small fruit and variable stone attachment while keeping broken stone and kernel material out of the pulp?
Will the buyer use the apricot base in a drink, spread or fruit preparation, and what fibre level and cooked flavour can each route accept?

Full Apricot line: process, equipment & image →

Cherry processing line

juice / juice concentrate / purée

Remove stems and unsuitable cherries, wash gently and separate stones before the chosen juice or purée route. Pressed juice may be clarified; a fruit preparation can retain more flesh. Select sweet or sour cherry as an incoming-material specification rather than treating their final flavour targets as interchangeable.

Questions for a representative trial

Will sweet cherries, sour cherries or both be processed, and how will their lots be kept distinct in the finished product?
What verification will detect residual pits and pit fragments, and how much flesh and skin may remain in a juice compared with the intended purée?

Full Cherry line: process, equipment & image →

Nectarine processing line

purée / fruit preparation / jam

Wash and inspect nectarines, remove stones and pulp the edible flesh. Their smooth skin does not remove the need to specify skin retention: a coloured fruit preparation and a pale smooth purée may require different finishing. Choose the subsequent formulation and packing route from the actual finished product.

Questions for a representative trial

Should the red skin contribute colour and visible particles, or should the fruit be refined to a more uniform purée?
What is the seasonal mix of firm and soft nectarines, and can pitting trials show acceptable flesh recovery without stone breakage across that range?

Full Nectarine line: process, equipment & image →

Peach processing line

purée / nectar base / jam

Sort ripe peaches, wash and remove stones before refining the flesh. Define whether skin is removed early or separated during pulping. Purée can feed a nectar or jam formulation, but these endpoints need different solids and texture targets. Assess pit fragments separately from normal skin and fibre residue.

Questions for a representative trial

Are the incoming peaches clingstone or freestone, and how does flesh attachment change the selected pitting approach?
Does the target purée permit peel colour, and what pit-fragment rejection, smoothness and oxidation limits must the finished sample meet?

Full Peach line: process, equipment & image →

Plum processing line

purée / juice base / jam

Sort plums by processing condition, wash and separate stones. Retain or remove skin according to the desired colour and texture, then pulp or extract for the selected product. Fresh-plum processing should be distinguished from the water-extraction route used when the incoming material is dried prunes.

Questions for a representative trial

Will raw material be fresh plums or dried prunes, and which preparation steps belong in the actual project scope?
How much skin-derived colour and coarse texture should remain, and can the pitting section handle the specified varieties without excessive broken-stone carryover?

Full Plum line: process, equipment & image →

9 PREPARATION ROUTES

Berries & Small Fruit

Small-fruit seeds and delicate skins differ from guava’s gritty stone-cell problem. Compare accepted seed sensation and the rejected fraction in a representative material trial.

Açaí processing line

açaí pulp / frozen purée base / blended beverage base

Clean and prepare the fruit for specialised depulping that removes edible pulp from the hard seed by friction. Added water is part of the product-definition decision. Screen the recovered pulp and arrange the specified preservation and cold-chain route; ordinary soft-berry crushing is not an equivalent upstream process.

Questions for a representative trial

What finished pulp solids are required, and how will water addition be controlled and recorded for each batch?
Will the plant receive freshly harvested fruit or already prepared pulp, and who is responsible for fruit pre-treatment, intact-seed discharge and the transfer into the required storage chain?

Full Açaí line: process, equipment & image →

Blackberry processing line

purée / juice concentrate / jam

Sort and clean blackberries, then pulp or press according to the chosen product. Screening determines the amount of hard seed material retained in the flesh. A juice route adds separation of suspended solids, while a jam route may deliberately keep a coarser fruit structure.

Questions for a representative trial

What seediness will the intended consumer accept, and should the finisher remove seeds fully or preserve part of the berry texture?
Which ripeness grades and varieties supply the plant, and how should trials balance colour extraction, coarse residue and saleable pulp recovery?

Full Blackberry line: process, equipment & image →

Blackcurrant processing line

juice / juice concentrate / jam base

Clean currants and remove unwanted stalks or field material before crushing and extracting. A juice product requires a decision on pulp separation and clarification, while a jam base preserves more fruit solids. Processing trials should connect the berry preparation step to the desired colour and extraction result.

Questions for a representative trial

What stalk and leaf load will arrive with the blackcurrants, and which receiving or cleaning step must remove it?
Is the buyer seeking a clear concentrate, a cloudy juice ingredient or a textured base, and how will colour, sediment and flavour be evaluated for that endpoint?

Full Blackcurrant line: process, equipment & image →

Blueberry processing line

purée / juice / fruit preparation

Remove stems and damaged blueberries, wash and open the skins before the selected extraction step. Skin management influences the colour and texture of the product. Refine for a smooth purée or extract and clarify for juice; a whole-berry fruit preparation needs gentler downstream handling.

Questions for a representative trial

Does the product need blueberry skin particles, a smooth coloured purée or intact berries, and what appearance defines acceptance?
Will berry size and firmness vary by variety or frozen supply, and can preparation trials obtain the desired colour without an objectionable skin residue?

Full Blueberry line: process, equipment & image →

Cranberry processing line

juice concentrate / beverage blend base / sauce

Sort and wash the comparatively firm berries, reduce their size and extract juice. A concentrated juice or blended beverage ingredient follows a different solids target from cranberry sauce. If additional extraction of press residue is considered, assess that stream separately rather than automatically blending it with primary juice.

Questions for a representative trial

Will cranberries be sold as a concentrated blending ingredient or as a sauce with retained fruit material?
What extraction intensity gives the desired balance of colour, tartness and recovery, and should primary juice and later extraction streams have separate acceptance criteria?

Full Cranberry line: process, equipment & image →

Goji Berry processing line

juice / fruit beverage base / purée development

Confirm whether goji arrives as fresh berries, frozen berries or dried fruit. Fresh fruit needs gentle handling; dried fruit requires a separately specified hydration or water-extraction route. Remove unwanted stems and coarse solids, then develop the desired juice or pulpy beverage base from representative material.

Questions for a representative trial

Which raw-material form is contracted, and should the project include rehydration rather than assuming a fresh-fruit washer and crusher?
How will bruising, stem carryover and residual small seeds be assessed, and what solids level and extraction flavour must the finished goji ingredient demonstrate?

Full Goji Berry line: process, equipment & image →

Raspberry processing line

seedless purée / juice / jam

Receive fragile raspberries with limited unnecessary handling and inspect before extraction. Gentle pulping followed by controlled screening separates seeds for a smoother purée; a seeded preserve uses a different finish. Juice extraction and clarification form another branch, so the desired product must be fixed before setting separation intensity.

Questions for a representative trial

How low must the residual seed content be for the buyer, and what pulp loss is acceptable to achieve that result?
Can the receiving and washing arrangement handle soft or thawed raspberries without excessive leakage, and does the product need to retain visible fruit texture?

Full Raspberry line: process, equipment & image →

Sea Buckthorn processing line

cloudy juice / clarified juice / purée base

Clean and extract the berries, separating the seed-containing residue from the liquid and pulp. Oil-bearing fractions make the choice between a cloudy product and clarified juice significant. Define any oil-recovery branch separately: recovering a beverage stream alone does not establish a complete seed- or pulp-oil project.

Questions for a representative trial

Should the finished sea buckthorn product retain its natural oil-bearing pulp or be separated to a clearer juice?
How much phase separation is acceptable during storage, and will seeds and pulp residues only be discharged or sent to a separately scoped recovery operation?

Full Sea Buckthorn line: process, equipment & image →

Strawberry processing line

purée / jam / juice base

Inspect berries gently and remove unsuitable fruit, then wash and separate caps or leaves. Pulping and screen selection determine whether the product retains its characteristic seeds or becomes smoother. Fresh fruit and thawed fruit can enter different preparation arrangements; define that raw-material state before specifying the front end.

Questions for a representative trial

Will the input be fresh capped berries, prepared frozen berries or both, and which cap-removal tasks must the plant perform?
Is the target a visibly seeded purée, a smoother beverage base or a preserve with fruit pieces, and what damage during washing is acceptable?

Full Strawberry line: process, equipment & image →

6 PREPARATION ROUTES

Tropical Purée Fruit

Tropical puree fruits sit near guava in the product catalogue, but mango stones, papaya cavities and fibrous flesh change the preparation. Start with their individual inlet boundaries.

Avocado processing line

purée / guacamole base / pulp for a separate oil route

Wash avocados, remove stones and separate unwanted skin before refining the flesh. Control air incorporation while developing the desired purée texture. A formulated guacamole base adds its own ingredients and particle specification. Sending avocado pulp to oil separation is a different downstream route that must be scoped independently.

Questions for a representative trial

Does the buyer want smooth avocado purée, a textured formulated base or feed for oil extraction, and which route defines acceptance?
How will stone pieces and dark peel fragments be rejected, and what colour change is acceptable from opening the fruit through the chosen packing and storage chain?

Full Avocado line: process, equipment & image →

Banana processing line

purée / smoothie base / fruit preparation

Wash and peel bananas before mashing and refining the flesh. Limit unnecessary exposure of the freshly prepared pulp to air and establish a handling sequence that fits the required colour. Natural purée and an acidified formulation must be specified separately because their product and treatment requirements differ.

Questions for a representative trial

What ripeness range can the receiving specification accept, and how will immature, starchier fruit be excluded or handled in a separate product?
How quickly must peeled fruit enter the controlled pulp stream, and what colour, consistency and acidification policy will the buyer use to accept the finished banana purée?

Full Banana line: process, equipment & image →

Jackfruit processing line

ripe-fruit purée / jam / dessert base

Open ripe jackfruit and separate edible bulbs from rind, sticky core and unwanted structural material. Remove the bulb seeds before grinding into pulp. The resulting ripe-fruit base can feed a preserve or dessert formulation. Young jackfruit intended for savoury pieces is a distinct product with a different preparation target.

Questions for a representative trial

Will the plant receive whole ripe fruit or already separated bulbs, and what labour and waste-handling scope is needed for the sticky core?
How will seeds and fibrous rag be excluded, and should the final product retain bulb texture or be refined into a uniform ripe-fruit base?

Full Jackfruit line: process, equipment & image →

Mango processing line

single-strength purée / purée concentrate / nectar base

Sort for processing maturity, wash and separate peel and stone from the edible flesh. Refine the recovered pulp to remove coarse fibres and unwanted peel fragments. Assess the resulting viscosity before selecting transfer and concentration equipment; ripe purée and formulated nectar are different product specifications.

Questions for a representative trial

What stone size, flesh attachment and fibre level occur in the intended mango varieties, including early and late harvest lots?
How smooth must the purée be, what speck level is acceptable, and is concentration required or would single-strength bulk purée suit the buyer?

Full Mango line: process, equipment & image →

Papaya processing line

purée / nectar base / blended fruit preparation

Sort papayas for suitable maturity, wash and separate skin and the seed-filled centre from the flesh. Pulp and refine the edible portion, then establish the intended recipe and product texture. Skin or seed contamination can change flavour, so preparation quality should be checked before downstream treatment is selected.

Questions for a representative trial

What papaya size and ripeness range will reach preparation, and which peeling and seed-removal tasks are included in the plant scope?
Is the final material natural purée or a formulated blend, and what evidence will confirm acceptable flavour, viscosity and absence of unwanted dark seed specks?

Full Papaya line: process, equipment & image →

Soursop / Guanábana processing line

purée / nectar base / frozen dessert base

Remove the fragile outer skin and recover the soft white flesh while separating the large dark seeds. Refine only as far as the required fibre texture allows, and organise prompt handling of the exposed pulp. Product development should begin with a purée specification before considering a thinner formulated nectar.

Questions for a representative trial

Can preparation trials remove the seeds intact while preserving enough edible flesh, and how will residual seed material be detected?
How much of the characteristic fibrous texture should remain, and what colour change or handling delay is acceptable before the soursop base enters its specified preservation route?

Full Soursop / Guanábana line: process, equipment & image →

6 PREPARATION ROUTES

Tropical Juice Fruit

Tropical juice fruits may need opening, pressing or seed separation that a guava pulp line does not perform. Separate juice extraction from later formulation or concentration.

Acerola / Barbados Cherry processing line

purée / juice blend base / concentrated ingredient

Receive and clean acerola, then crush or pulp the small fruit while separating its seeds. Develop the recovered flesh or liquid as a defined ingredient for the intended blend. Concentration and preservation remain separate choices; the source references establish an application, not a guaranteed finished nutrient content.

Questions for a representative trial

Will the ingredient be bought for its flavour, colour or a separately tested composition specification, and what maturity stage must suppliers deliver?
How will small seeds and skin fragments be separated, and should the final sample be judged as a pulpy ingredient or as a lower-pulp blending liquid?

Full Acerola / Barbados Cherry line: process, equipment & image →

Dragon Fruit / Pitaya processing line

purée / nectar base / blended juice ingredient

Separate the peel from the edible flesh and pulp the chosen dragon-fruit variety. White-, pink- and red-fleshed material should be identified in the raw-material specification. Decide whether the small black seeds remain visible before developing a smoother or more pulpy beverage base; equipment settings require material trials.

Questions for a representative trial

Which flesh colour and variety will the buyer contract, and should batches with different colour be blended or kept separate?
Does the desired appearance include intact black seeds, and what test will establish whether refinement improves the drink base without removing too much desirable texture?

Full Dragon Fruit / Pitaya line: process, equipment & image →

Lychee processing line

juice / juice concentrate / nectar base

Clean lychees and choose a preparation method that keeps unwanted shell and seed material out of the edible stream. Extract the aromatic flesh or juice and establish the required clarity. A clear concentrate adds clarification, while a nectar base can retain more body; exposed-product colour must be monitored.

Questions for a representative trial

Will input be whole lychee, peeled flesh or another prepared ingredient, and which shell-removal and seed-separation operations belong in the project?
What level of browning, shell-derived flavour and aroma loss can the target product accept, and should the buyer compare a pulpy base with a clarified juice sample?

Full Lychee line: process, equipment & image →

Passion Fruit processing line

juice / juice concentrate / nectar base

Wash the fruit, open or separate the rind and collect the seed-bearing pulp. Recover the juice and refine to the specified residual pulp content. Concentrated juice and a visibly seeded fruit preparation need distinct finishing decisions; aroma retention should be assessed in the actual chosen downstream route.

Questions for a representative trial

Will small purple and larger yellow fruit share one receiving specification, and how will their rind and seed differences be covered in trials?
Must the final ingredient be seed-free, deliberately seeded or only lightly pulpy, and what extraction intensity achieves that texture without unwanted broken-seed material?

Full Passion Fruit line: process, equipment & image →

Pineapple processing line

NFC juice / juice concentrate / pulpy beverage base

Remove unwanted crown material, wash and size pineapples for the selected extraction method. Separate the peel from the juice-bearing flesh, then reduce coarse fibres and unwanted specks to the target pulp level. A juice-only project and one receiving trim from a slice operation have different incoming-stream requirements.

Questions for a representative trial

Will extraction start from whole pineapples or from prepared flesh and trim, and which fruit shapes must the chosen feed arrangement handle?
What limit applies to eye or peel specks and long fibres, and should edible core material be included in the same juice stream or evaluated separately?

Full Pineapple line: process, equipment & image →

Starfruit / Carambola processing line

juice / sweetened beverage base / blended juice ingredient

Inspect and wash starfruit, trim unsuitable portions and reduce the flesh for juice recovery. Separate unwanted coarse material before deciding on clarification or retained pulp. The relatively light juice character makes blend development a useful project step; a formulated drink should have its own flavour and ingredient specification.

Questions for a representative trial

What cultivar and maturity mix will supply the plant, and how much variation in acidity and flavour can the target blend tolerate?
Should the buyer retain a cloudy appearance or require a clearer ingredient, and which ridge fragments, seeds or visible sediment need to be removed during finishing?

Full Starfruit / Carambola line: process, equipment & image →

3 PREPARATION ROUTES

Melons

Melon products require rind control and a defined flesh or juice stream. Compare their thinner feed and aroma target separately from a guava puree specification.

Cantaloupe / Muskmelon processing line

purée / nectar base / frozen fruit base

Clean the outer surface before cutting, remove rind and the central seed cavity, and pulp the edible orange flesh. A purée or formulated nectar requires a specified body and flavour target. Treat research preservation examples as development evidence; the commercial product still needs its own validated processing and storage design.

Questions for a representative trial

How will the washing arrangement address the netted rind before the cutting step exposes the flesh?
What maturity, orange colour and aroma are required, and should the finished base be smooth enough for a drink or retain more texture for a frozen dessert application?

Full Cantaloupe / Muskmelon line: process, equipment & image →

Honeydew Melon processing line

purée development / juice blend base / fruit preparation

Sort honeydew for the required maturity, clean the rind and remove skin, central seeds and unsuitable flesh before pulping. Develop the resulting material against a buyer-approved flavour and texture target. A light-coloured melon base may be used in a blend, but its process must be trialled separately from darker fruit.

Questions for a representative trial

What ripeness test will be used at receiving, and which differences between firm honeydew and fully ripe flesh must the preparation section handle?
How much pale-green colour and delicate aroma should remain, and will the buyer accept a pulpy base or require further separation for a smoother beverage?

Full Honeydew Melon line: process, equipment & image →

Watermelon processing line

juice / juice concentrate / beverage blend base

Clean the whole fruit before opening and separate the edible flesh from the rind to the agreed product specification. Remove unwanted seeds and extract or finish the flesh into juice. Set the pulp and colour target before concentration or blending; trial the entire intended preservation and storage route.

Questions for a representative trial

Will seeded and seedless watermelons both be accepted, and how will rind carryover and occasional hard seeds be controlled?
What incoming ripeness and flesh colour are required, and does the buyer prefer a pulpy juice or a clearer base after observing sediment and flavour during storage trials?

Full Watermelon line: process, equipment & image →

5 PREPARATION ROUTES

Coconut & Nut Beverages

Coconut and nut beverages have oil phases and allergen changeovers absent from a simple guava fruit brief. Agree extraction residues, dispersion and cleaning before comparing shared equipment.

Almond processing line

almond beverage / nut beverage base

Start from specified food-grade kernels or a purchased almond paste. Kernel processing includes preparation and wet size reduction; paste starts at reconstitution and mixing. Develop the required particle distribution and emulsion, then test the finished formulation. Skin-on and blanched ingredients can produce visibly different beverages.

Questions for a representative trial

Will the incoming ingredient be blanched kernels, skin-on kernels or almond paste, and which upstream work is actually required?
What limits apply to visible brown specks, grittiness and sediment, and which nut loading and beverage body should the trial formulation achieve before final equipment selection?

Full Almond line: process, equipment & image →

Cashew Kernel processing line

cashew beverage / nut cream base

Specify prepared edible cashew kernels or a purchased paste as the incoming material. Disperse or wet-mill that ingredient with the chosen liquid phase, then develop the required smoothness and beverage body. Raw shell handling is outside this kernel-based outline and must not be implied by a generic fruit washer.

Questions for a representative trial

Will the plant buy ready-to-use kernels or paste, and what incoming particle size, flavour and ingredient traceability are required?
Is the target a pourable drink or a thicker cream-style base, and how will solids loading, residual grit and separation be compared across the buyer-approved trial formulations?

Full Cashew Kernel line: process, equipment & image →

Coconut processing line

coconut milk / coconut cream / coconut water

Specify coconut water and coconut kernel as distinct incoming streams. Water is collected and screened; milk and cream require shell removal, kernel preparation, size reduction and liquid extraction. The milk route then needs fat and solids adjustment and emulsion development. One shared downstream description cannot replace these different front ends.

Questions for a representative trial

Will the plant receive whole coconuts, prepared kernel or bulk coconut ingredients, and who owns dehusking, deshelling and brown-skin removal?
Is the saleable product water, milk or cream, and which fat content, particle size and separation limits must samples demonstrate?

Full Coconut line: process, equipment & image →

Hazelnut processing line

hazelnut beverage / flavoured nut base

Define prepared kernels or paste as the starting ingredient, then disperse and reduce particles to the required beverage texture. Skin retention and the chosen flavour profile should be fixed before trials. Develop mixing and homogenisation around the actual formulation; a purchased flavoured paste changes the preparation scope.

Questions for a representative trial

Will the customer use skin-on, blanched or flavour-developed hazelnut material, and who supplies any roasting or skin-removal operation?
What appearance and hazelnut intensity are desired, and can the trial demonstrate acceptable specks, sediment and fat separation at the proposed ingredient loading?

Full Hazelnut line: process, equipment & image →

Walnut processing line

walnut beverage / emulsified nut base

Prepare edible walnut kernels and reduce them into the chosen aqueous beverage base. Formulation and homogenisation influence the oil-bearing dispersion, while any deliberate oil separation is an additional process choice. Test physical and flavour stability using the intended storage conditions rather than assuming a recipe from another nut transfers unchanged.

Questions for a representative trial

Should the product retain the full kernel-derived oil fraction or use a separately specified lower-fat ingredient?
What balance of walnut flavour, colour and smoothness does the buyer require, and how will oil separation, sediment and oxidative flavour changes be assessed during formulation trials?

Full Walnut line: process, equipment & image →

6 PREPARATION ROUTES

Specialty & Seed-Rich Fruit

Arils, pits and dried flesh replace the guava seed-and-stone-cell question with different separation duties. Added water and the desired retained solids remain explicit selection inputs.

Date-Palm Fruit processing line

date paste / date syrup / extracted beverage base

Sort and clean dates and remove pits before the selected product route. Whole-flesh paste retains insoluble fruit material; syrup production extracts soluble material, separates solids and concentrates the liquid. Specify any softening or hydration stage from the actual fruit condition rather than assuming all dates enter with the same moisture.

Questions for a representative trial

Will input be soft dates, drier dates or prepared pitted fruit, and what pit-fragment check belongs before grinding or extraction?
Does the buyer need an opaque whole-fruit paste or a filtered syrup, and which moisture, colour and soluble-solids targets determine the necessary extraction and concentration stages?

Full Date-Palm Fruit line: process, equipment & image →

Fig processing line

jam / fruit paste / fruit preparation

Inspect delicate figs, wash and trim stems before chopping or pulping. Specify whether the naturally seed-rich texture should remain in the product. A thick fig paste or jam is developed from the prepared fruit with its own formulation and consistency target; do not treat it as a clarified juice by default.

Questions for a representative trial

Should the final spread retain characteristic fine seeds and pieces, or does the buyer require a more uniform paste?
Will fresh and dried figs be handled in separate preparation routes, and how will stem fragments, damaged soft fruit and variations in incoming moisture be managed?

Full Fig line: process, equipment & image →

Jujube / Chinese Red Date processing line

jujube paste / juice beverage base / jam

Treat jujube as its own raw material, distinct from date-palm fruit. Sort and wash fresh or dried jujubes, separate pits and prepare the flesh for pulping or extraction. Dried fruit may need a defined softening stage. Paste filling and beverage ingredients require different retention of skin and other insoluble material.

Questions for a representative trial

Will the plant use fresh jujubes, dried red dates or both, and which pit-removal and softening steps are included?
Should the buyer receive a dark whole-fruit paste, a smoother refined filling or an extracted beverage base, and what skin particles and pit-fragment limits apply?

Full Jujube / Chinese Red Date line: process, equipment & image →

Persimmon processing line

purée / frozen fruit base / dessert ingredient

Identify the persimmon variety and edible ripeness, remove unwanted calyx, skin and seed material, and recover the flesh as purée. Astringency acceptance belongs at raw-material preparation, before the purée is treated as a finished ingredient. Frozen-pulp references support a product route but do not establish an ambient shelf-life process.

Questions for a representative trial

Is the incoming crop an astringent or non-astringent type, and what acceptance check confirms that fruit is ready for the intended purée?
What calyx fragments, seed pieces and colour change can the finished base tolerate, and will the buyer use frozen bulk pulp or commission a separately validated packaged product?

Full Persimmon line: process, equipment & image →

Pomegranate processing line

juice / juice concentrate / beverage blend base

Clean the fruit and separate juice-bearing arils from peel and internal membranes. Extract from the arils with controlled pressure, then screen the juice and decide whether clarification is needed. Keeping unwanted rind material out of extraction is a separate task from removing normal suspended pulp after pressing.

Questions for a representative trial

What peel and white-membrane carryover is acceptable after aril separation, and how will the resulting taste be checked?
Should the finished juice be cloudy or clear, and what extraction trial will balance juice recovery against unwanted seed breakage and astringency for the contracted fruit varieties?

Full Pomegranate line: process, equipment & image →

Tamarind processing line

pulp paste / juice concentrate / sauce base

Define whether tamarind arrives in pods or as prepared pulp. Remove shell, stringy material and seeds where required, then develop pulp dispersion or extraction for the selected endpoint. A thick culinary paste retains more fruit solids than a smoother beverage ingredient, so their finishing requirements should be set separately.

Questions for a representative trial

Will incoming tamarind be whole pods, deseeded pulp blocks or another prepared form, and who owns the shell- and seed-removal work?
What dilution, fibre content and tangy flavour should the final ingredient have, and is concentration needed for a beverage customer or is a spoonable sauce base the objective?

Full Tamarind line: process, equipment & image →

10 PREPARATION ROUTES

Vegetables, Roots & Rhizomes

Root and vegetable routes add soil removal, peel, fibre or starch decisions. A sauce or formulated base also needs its recipe boundary stated separately from unformulated guava pulp.

Beetroot processing line

juice / purée / vegetable blend base

Receive table beetroot to a defined size and condition specification, remove soil and unwanted tops, then wash and prepare the roots. Cut before pressing for juice or softening and refining for purée. Evaluate the target colour and flavour using the selected route; raw beet varieties are not automatically interchangeable.

Questions for a representative trial

Will the buyer supply red table beetroot rather than sugar beet, and what root diameter and soil contamination range must preparation handle?
How much earthy flavour and pulp should remain, and what colour retention, coarse fibre and sediment limits will be used to approve the finished beetroot ingredient?

Full Beetroot line: process, equipment & image →

Carrot processing line

juice / juice concentrate / purée

Remove soil and stones, wash, peel or otherwise prepare carrots, then cut them for the selected extraction route. Condition and press for juice, or soften and refine for purée. The desired fibre retention changes both preparation and finishing, so a purée enquiry should not inherit a clear-juice specification.

Questions for a representative trial

What soil load, root size and peel condition will the receiving section encounter, and which preparation steps are included?
Does the customer want retained carrot body or a lower-pulp juice, and how will cutting size, fibre removal and the resulting pumpability be compared in representative trials?

Full Carrot line: process, equipment & image →

Celery processing line

juice / vegetable blend base

Separate and clean the edible celery portions, then chop or shred the fibrous stalks to suit the extraction method. Press and screen the juice to the required solids level. Feed preparation matters to handling and extraction; equipment trials with whole stalks should not automatically stand in for a consistently cut production feed.

Questions for a representative trial

Will the contracted ingredient contain stalks only or include leaves, and what soil or fibrous trim must be removed before extraction?
Which feed length and preparation method work with the chosen equipment, and what residual fibre, sediment and celery flavour intensity must the buyer approve?

Full Celery line: process, equipment & image →

Chili Pepper processing line

chili paste / chili sauce / seasoning base

Sort and wash peppers, remove stems and decide how much seed and internal material to retain before grinding. Refine for paste or combine with the specified recipe ingredients for sauce. Texture, colour and pungency are separate acceptance targets; red and green chili products should have clearly identified formulations.

Questions for a representative trial

Will the input be fresh green peppers, ripe red peppers or a prepared chili ingredient, and what stem and seed handling belongs upstream?
Is the desired sauce smooth or visibly seeded, and how will the buyer compare heat level, colour, viscosity and batch-to-batch flavour before approving the final recipe?

Full Chili Pepper line: process, equipment & image →

Cucumber processing line

juice / blended vegetable beverage base

Wash and inspect cucumbers, trim unsuitable portions and decide whether peel and mature seeds belong in the product. Reduce the prepared fruit and extract juice, then finish to the agreed pulp level. Formulated blends require their own recipe; a cucumber juice specification alone does not define the complete beverage.

Questions for a representative trial

Is the desired ingredient pale and mild or greener with peel character, and how will that decision change preparation?
What maturity and seed development will incoming cucumbers have, and can the proposed extraction trial demonstrate acceptable bitterness, coarse material and sediment without losing the intended fresh flavour?

Full Cucumber line: process, equipment & image →

Ginger processing line

ginger paste / culinary blend base

Separate soil and unsuitable rhizomes, wash and prepare the skin as specified before cutting and grinding. Control the resulting fibre length and paste coarseness. A plain ginger paste and a formulated ginger-based sauce have different ingredient and texture requirements; a powder or oil project would add separate operations.

Questions for a representative trial

What rhizome size, branching and skin condition will be accepted, and which cleaning or peeling steps must the plant perform?
How fibrous or smooth should the paste be, and how will trials compare pungency, coarse strands and pumpability for the actual mature or young ginger supply?

Full Ginger line: process, equipment & image →

Pumpkin processing line

purée / soup base / bakery filling base

Wash pumpkins, open and remove the seed cavity, then separate unwanted rind and stringy material. Reduce and soften the edible flesh before refining to the selected texture. A plain vegetable purée and a seasoned soup or sweet bakery filling are different formulations and need separate solids, particle and packing specifications.

Questions for a representative trial

Which pumpkin varieties and rind thicknesses must preparation accommodate, and who handles seed-cavity and peel waste?
Does the buyer want a smooth pumpable purée or a thicker filling base, and how will variable flesh moisture, coarse fibres and heat-transfer behaviour be evaluated before choosing downstream equipment?

Full Pumpkin line: process, equipment & image →

Spinach processing line

green juice ingredient / vegetable purée development

Inspect spinach leaves, remove unsuitable material and wash to control soil and grit before size reduction. A pressed juice route separates fibrous residue; a vegetable purée retains more solids and needs its own texture trial. Leafy feed should be evaluated directly rather than borrowing a firm-root preparation design.

Questions for a representative trial

Will baby leaves, mature leaves or substantial stem material arrive, and how should that mix influence washing and feeding?
Does the buyer want a low-fibre green juice or a thicker purée ingredient, and what grit, stringy particles, colour and phase separation limits will govern trial acceptance?

Full Spinach line: process, equipment & image →

Sweet Potato processing line

purée / bakery base / formulated beverage base

Clean and prepare the roots, remove unwanted peel and defects, cut and cook or condition before pulping. Refine to the required consistency and establish a controlled incoming-material specification. Storage and starch changes can affect the resulting purée, so matching a single fresh-root sample is insufficient for a year-round product.

Questions for a representative trial

Will orange-, white- and purple-fleshed varieties be kept separate, and what root storage history belongs in the acceptance specification?
How much variation in sweetness and viscosity can the buyer accept, and should trials include stored roots to check pumping, refinement and the intended final product texture?

Full Sweet Potato line: process, equipment & image →

Tomato processing line

paste / purée / juice / ketchup or sauce base

Wash and inspect tomatoes, crush and apply the product-specific break treatment, then separate skin and seeds by refining. Juice, purée and concentrated paste diverge in retained solids and concentration. Ketchup or sauce adds formulation and mixing; it should not be presented as the same unformulated tomato stream.

Questions for a representative trial

Is the buyer targeting a fluid juice, a spoonable sauce base or concentrated paste, and which viscosity and solids specification defines success?
How will trials choose the break treatment for the required texture, and what residual skin, seed material and colour variation can the downstream customer accept?

Full Tomato line: process, equipment & image →

RELATED PROCESS NOTES

Fruit lines are not interchangeable templates. The useful comparison is the material structure a route must handle, the separation duty that comes first and the product boundary it finishes at. The established local notes below offer further comparison with guava preparation.

Process and selection notes

Mango Pulp Lines

Mango preparation separates central-stone removal from fibre finishing. The declared flesh or pulp stream then enters buffering, thermal treatment and the chosen bulk-product packing route.

Route difference: Mango planning separates stone removal from fibre finishing before the puree moves to buffering, treatment and bulk packaging.

Compare the named processing duty with guava pulp and juice lines; routes differ by material structure and intended finished product. Specify whether the inlet is whole fruit or already destoned pulp; use representative fruit to agree fibre tolerance, reject sampling and the downstream product.

Read the process notes →

Process and selection notes

Papaya Puree Lines

Papaya preparation separates soft flesh from peel and cavity seeds before refining. Gentle transfer and a declared prepared-flesh inlet keep manual preparation distinct from the downstream equipment scope.

Route difference: Papaya preparation focuses on soft-flesh handling and separating peel and dark seeds before refining and consistency checks.

Compare the named processing duty with guava pulp and juice lines; routes differ by material structure and intended finished product. Declare peeled, deseeded flesh as the inlet when that is the quoted boundary; list manual preparation and residue handling separately from the supplied refining duty.

Read the process notes →

Process and selection notes

Passion Fruit Lines

Passion fruit lines remove shells before seed-pulp finishing, with optional juice concentration; compare opening interfaces, seed integrity, cloud and starch-related trial questions.

Route difference: Passion fruit planning removes shells before seed-pulp finishing and gives cloud, seed integrity and starch behaviour their own trial questions.

Compare the named processing duty with guava pulp and juice lines; routes differ by material structure and intended finished product. Declare shell removal or prepared aril feed separately from seed-pulp finishing; trial seed integrity, cloud and viscosity before defining the downstream treatment and packing interface.

Read the process notes →

Process and selection notes

Fruit Pulp Lines

Fruit pulp systems use distinct mango, guava and papaya preparation routes before shared downstream duties; compare feed boundaries, residue streams and bulk-product specifications.

Route difference: A multi-fruit view is useful for shared downstream duties, provided the preparation and residue boundaries remain fruit-specific.

Compare the named processing duty with guava pulp and juice lines; routes differ by material structure and intended finished product. Define which fruit preparation steps are supplied and the inlet condition at every shared module; compare cleaning, product envelope and packing separately for each campaign.

Read the process notes →

Keep the guava boundary visible

Use another fruit line to question a preparation step, a residue stream or a downstream handover. Do not copy its machine sequence into a guava project without checking guava seeds, stone cells, acidity and the intended product. The guava route remains the place to define those duties.

Compare guava processing routes →Browse guava equipment →

LET’S DEFINE YOUR EQUIPMENT SCOPE

What are you planning
to process?

Share your fruit or pulp, target product and planned quantity. We can start with a short brief.

Request an equipment quotation ↗Or email sales@guavaprocessingline.com